Audiovox 5BCR10P User Manual

128-8776
1 of 8
Your Alarm and or Remote Start unit has a configurable receiver that allows
the transmitter to be programmed to operate the Lock Unlock functions with
one transmitter button or with two transmitter buttons (separate Lock/
Unlock). In addition, the receiver also allows driver priority function. This
driver priority function takes place when ever a particular transmitter is
used to unlock the vehicle regardless of the selection of one button or two
button operation.
The following indicates the receiver programmable slots.
1 Lock/Unlock or Lock
2 Unlock if Programmed
3 Trunk Release & or Remote Start (Optional on some models)
4 Auxiliary Output
5 Auxiliary Output
6 Driver 1 Priority or Sperate Output
7 Driver 2 Priority or Separate Output
Receiver channels 6 or 7 will accept the programming of transmitter
channel 1 if used as the Lock/Unlock button, or Channel 2 when separate
Lock Unlock buttons are programmed. In this way, whenever the transmit-
ter is used to unlock the vehicle, channel 6 or 7, when programmed, will
provide a pulsed ground output. This output can be connected to the driver
priority function of the vehicle to reset preset user features. Please consult
with your installation center technician to see if this feature is available in
your vehicle.
NOTE: A total of 4 transmitters may be programmed into any receiver
channel.
Force programming a transmitter, removing a transmitter, or reprioritizing a
transmitter is covered later in this manual.
Also, if you do not program a transmitter button into channel 2 which is the
separate unlock/disarm channel, then whatever button is programmed into
channel 1 will serve as both lock/arm & unlock/disarm.
NOTE: The RED Button serves as a function button in combination with other
buttons explained in your owners manual. This button may not be used to
operate a receiver channel.
NOTE: The Option Button is predetermined and programmed for access to
Time Start, and Temperature Start & Check so it cannot be used for multiple
button operation of any other feature. It will however operate for any single
button programming.
This transmitter is also capable of one button programming for certain model
Audiovox Alarms. If your alarm is one of these models, then when step 3 is
completed on the following page, you can turn the ignition switch off and
Model 5BCR10P
Programming Guide

Audiovox 5BCR10P Specifications

General

Brand	Audiovox
Model	5BCR10P
Category	Car Alarm
Power	12V DC
Features	Keyless Entry

Summary

Model 5BCR10P Programming Guide

Receiver Programmable Slots Overview

Lists the 7 programmable receiver slots for transmitter functions like lock, unlock, trunk release, and auxiliary outputs.

Driver Priority Function Explanation

Details how a specific transmitter can be set to automatically adjust vehicle settings based on the driver.

Entering Transmitter Program Mode

Programming Lock, Unlock, and Trunk/Auxiliary Functions

Guides users through programming lock/arm, unlock/disarm, trunk release, and first auxiliary output functions.

Programming Second Auxiliary and Driver Priority Outputs

Covers programming auxiliary output 2, driver priority 1, and driver priority 2 using transmitter buttons.

Managing Transmitters: Erasure and Reprogramming

Procedure for Erasing Lost or Stolen Transmitters

Outlines the steps to remove old or lost transmitters from the receiver's memory.

Reprioritizing Transmitter Button Functions

Describes methods to change a transmitter button's function or reassign it to a different channel.

Transmitter Battery Maintenance

Battery Deterioration and Replacement Indicators

Advises on recognizing low battery indicators and recommends replacement every 6-8 months.

Step-by-Step Battery Replacement Guide

Provides a visual guide for opening the transmitter, replacing the battery, and reassembling the unit.

Ordering Replacement Transmitters

Transmitter Order Form Details

Provides an order form with necessary details for purchasing replacement transceivers.

Phone Ordering and Contact Information

Lists contact information and instructions for ordering replacement transmitters by phone.