Do you have a question about the Audiovox SECURIKEY+ and is the answer not in the manual?
Instructions for connecting system components and preparing for initial setup.
Procedure to test the functionality of both remote transmitters.
Verifying the LED response and functionality of the valet control switch.
Testing the arming, disarming, and panic features of the system.
Steps to test the shock sensor's warn-away and full alarm functions.
Procedure to disarm the system when a transmitter is lost or defective.
Testing automatic door locking upon starting and unlocking upon stopping.
Testing basic remote functions like lock, unlock, and all-door unlock.
Testing the activation of headlights using the remote transmitter.
Simulating intrusion events to test system response and LED indicators.
Procedure to erase all previously coded transmitter buttons from system memory.












Loading...