cl REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play
of the selected track (“RPT” will appear on the
display panel). Play of the track will continue to
repeat until the button is pressed again and the “RPT”
indication disappears from the display panel. Repeat
Play mode will also be cancelled by activating the
Shuffle Play cmor Track Scan cnfunctions.
cm SHUFFLE PLA YSELECTOR(SHF)
During disc play, press this button to play the tracks
on the disc in a random shuffled order (“SHF” will
appear on the display panel). In Shuffle Play mode,
pressing the Forward Track Select ( ) will also
select tracks in the random order instead of the
normal progression. The first press of the Backward
Track Select ( ) will go back to the beginning of
the track in play. Additional presses will select tracks
in random order. The Shuffle Play mode can be
cancelled by pressing the button again (“SHF”
indication will disappear from the display panel) or
by activating the Repeat Play clor Track Scan cn
functions.
cn TRACK SCAN (SCN)
During disc play, press this button to play the first 10
seconds of each track on the disc (“SCN” will appear
on the display panel). When a desired track is
reached, press the Scan button again to cancel the
function and play of the selected track will continue.
T rack Scan mode will also be cancelled by activating
the Repeat Play cl, Shuffle Play cm, or Track Select
bsfunctions.
co DISC EJECT ( )
Disc play is stopped, the disc is ejected and the unit
will change to radio operation by pressing this
button. If the disc is not removed from the unit and
the button is pressed again, the disc will be re-loaded
and begin playing.
If the disc is not removed from the disc slot within
10 seconds of being ejected, it will automatically be
re-loaded into the unit to prevent it from being
accidentally damaged. Play of the disc can be
resumed by using the CD Mode Selector bu to
choose CD player function.
cp TIME/FREQUENCY SELECTOR (T/F)
This unit can be set so that either the clock time or
radio frequency/CD player functions will normally
appear on the display panel. Pressing the Time/
Frequency Selector button when the radio frequency
or CD player track indication is shown will change
the display to show the time. The time will then be
the priority setting and the display will automatically
return to time display 5 seconds after any other radio,
CD player, or audio function display.
If the unit is set to time display priority, pressing the
Time/Frequency Selector button will change the dis-
play to show the radio frequency/CD player indica-
tion and this will then become the priority setting to
which the display automatically returns 5 seconds
after any other function is activated.
cq THEFT-DETERRENT L.E.D.
Located on the chassis behind the front panel, a light-
emitting diode (L.E.D.) will flash when the panel is
removed. The flashing light serves as a visual warn-
ing to the would-be thief that the unit has been dis-
abled by removal of the front panel.
cr RE-SET BUTTON
A Re-Set button is located on the front of the chassis
(front panel must be removed to access the button).
The re-set circuitry is provided to protect the
microprocessor circuitry and should only be activated
under the following circumstances as it will erase
the time and pre-set memories.
1. Upon initial installation after all wiring is completed.
2. After the position of the frequency step switch on
the bottom of the chassis has been changed.
3. If there is a malfunction of any of the switches on
the unit, pressing the Re-Set button may clear
the system and return to normal operation.
cs FRONT P ANELRELEASE BUTTON
This button is used to release the mechanism that
holds the front panel to the chassis. To detach the
front panel, press the button so that the left side of
the panel is released. Grasp the released side and
pull it off of the chassis.
To re-attach the panel, position the right side of the
panel in place first and then press the left side of the
panel until the mechanism locks it into place.
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
88
88
8
To Next Page
Loading...
