To Next PageTo Next Page
Need help?Do you have a question about the Audiovox PurSuit PRO9056C and is the answer not in the manual?
General| Brand | Audiovox |
|---|---|
| Model | PurSuit PRO9056C |
| Category | Remote Starter |
| Language | English |
Key installation advice, including avoiding hot surfaces, using grommets, and proper tool usage for safety.
Mounting location and installation guidelines for the control module, avoiding interference.
Installation and function of the hood pin switch for safety and security shutdown.
Optimal placement and installation of the antenna and programming switch for best reception.
Detailed instructions for connecting the 6-pin main power harness wires.
Critical connection for starter output, detailing neutral start switch safety considerations.
Connects to alarm ignition input for remote start operation while armed.
Monitors engine tach rate; requires proper connection for unit operation.
Provides ground for shock sensor bypass and GM VATS key override.
Connects to diesel glow plug wire to manage engine start sequence.
Connects to the hood pin switch for safety shutdown functionality.
Connects to positive inhibit inputs for system shutdown and alarm triggering.
Controls parking light flash output and input for system status indication.
Wires for disarming theft systems, re-locking doors, and other functions.
Provides ground for starter output or ECM wake-up wire in some vehicles.
Connects the antenna receiver assembly to the control module for data and power.
Switches on when remote start is activated, programmed via Bank 3 Feature 12.
Provides 12V constant output for bypass interface modules or transponder bypass relays.
Monitors battery voltage during cranking to confirm engine running.
Learns and monitors engine tach signal for proper remote start operation.
Uses DBI data port for tach signal; use Green/Orange wire if unavailable.
Configures the unit for hybrid vehicles; requires Preset Time setting.
Verifies the hood pin switch correctly shuts down the remote start.
Explains how to enter and exit override mode for service or manual shutdown.
Discusses safety implications for mechanical switches and alternative wiring.
Explains how to use key-in sensors as an alternative safety measure.
Details two methods for wiring key-in sensor circuits for safety.
Final steps for mounting the module, securing wiring, and applying labels.
Final checks, panel replacement, and explaining system features to the customer.
Lists and describes selectable alarm features configurable via the transmitter.
Instructions for selecting remote start features using the transmitter lock button.
Procedure for learning the engine's tach signal for proper remote start operation.
Lists and describes selectable remote start features configurable via the transmitter.
