What to do if there is no sound from my Audiovox Radio?
If there is no sound from your Audiovox Radio, first ensure the audio cables are correctly connected at both the Shuttle and the radio. If the cables are properly connected, try selecting another FM modulator frequency, as the current one may be incorrect.
Why does my Audiovox Sirius SIR-PNP2 say 'Check Antenna'?
If your Audiovox Radio is displaying a 'Check Antenna' message, the satellite antenna might not be properly connected to the Shuttle. Ensure that the satellite connection to the Shuttle is secure. If the antenna or cable is faulty, it is recommended to contact your system installer or vendor for assistance.
How to fix audio static or loss of clarity on Audiovox Sirius SIR-PNP2?
If you are experiencing audio static or loss of clarity with your Audiovox Radio, try switching to another FM frequency, as the current one may contain static. Also, verify that the vehicle antenna cable is securely connected to the radio.
How to fix Audiovox Sirius SIR-PNP2 Shuttle that does not turn on?
If your Audiovox Radio Shuttle does not turn on, check the fuse and ensure the power cable is properly connected.
What to do if there is no signal on Audiovox Sirius SIR-PNP2 display?
If there is no signal on your Audiovox Radio Shuttle display, check for any obstacles over or around the antenna. Try changing your location to eliminate nearby obstacles such as bridges.
Identifies the main parts of the Sirius Shuttle system, including the unit and remote.
Provides initial steps for setting up and activating the Sirius Shuttle receiver.
Explains the primary control for navigation and selection within menus and streams.
Details the function for capturing, storing, and alerting on program data.
Describes how to switch between preset bands and activate preset tuning.
Covers methods for tuning by category and direct stream number entry.
Explains how to set, use, and navigate stream preset buttons and list modes.
Details options for viewing stream names, artists, and song titles.
Explains capturing, storing, and viewing program data in memory.
Describes how to enable/disable S-Seek and interpret alerts for matched songs.
Details options for replacing or canceling when memory storage is full.
Covers viewing Sirius ID and adjusting display contrast, dimming, and font.
Details confirmation tones, FM transmitter settings, and audio levels.
Explains adding/skipping streams and locking access with a code.
Enables or disables the automatic memory search (S-Seek) function.
Provides an option to erase all stored memory locations.
Allows setting the clock format, time zone, and DST observance.
Configures the unit's time zone and daylight saving time observance.
Enables setting an alarm to turn the unit on at a specific time.
Details setting specific alarm times and programming alerts for streams.
Configures automatic shutdown and timed sleep mode for the unit.
Resets the unit to its original factory settings for various parameters.
Explains the functions of each button on the wireless remote control.
Lists common issues, their probable causes, and suggested solutions.
Details audio output levels, fuse rating, and power supply requirements.
To Next Page
General
