Audison DRC AC User Manual

20.01.23, 14:06
DRC AC – Audison
https://audison.zendesk.com/hc/en-gb/articles/9925528017809-DRC-AC
1/5
The DRC AC is the remote controller compatible only with the Audison line of AF bit amplifiers with
integrated Dsp. It can be connected to the DRCC port of an AF bit device by using the cable included in
the box.
It can be mounted in two ways:top mount kitorrecessed mount kit.
WARNING:for both mounting cases please run the DRC AC cable through the hole as per picture above,
in order to ensure a proper LED alignment during the use of the controller.

The DRC AC can be used to turn on/off the amplifier and to perform a set of functions programmable on
the bit Drive software.

1. HOW TO USE IT

Audison DRC AC Specifications

General

Brand	Audison
Model	DRC AC
Category	Remote Control
Language	English

Summary

DRC AC Introduction and Connectivity

AF M5.11 Bit Amplifier Port Identification

Identifies key ports on the AF M5.11 bit amplifier for DRC AC connection.

DRC AC Mounting Kit Options

Details on the top mount and recessed mount kits for installing the DRC AC.

DRC AC Basic Functions Overview

Introduces the DRC AC's capability to control amplifier power and functions.

DRC AC Operation and Control

Using the DRC AC Knob for Navigation

Explains how to use the central knob for function selection and volume adjustments.

Amplifier Power Control with DRC AC

Procedures and requirements for turning the amplifier on and off using the DRC AC.

Programmable Functions and Default Settings

Lists default functions and their LED indicators for the DRC AC.

DRC AC Configuration with Bit Drive Software

Accessing the DRC AC Settings Interface

Guide to opening the DRC AC configuration panel within the bit Drive software.

Adjusting DRC AC Sleep Mode and Brightness

How to configure sleep mode behavior and LED brightness for the DRC AC.

Customizing DRC AC Functions and Colors

Steps to assign up to five programmable functions and their LED colors.

DRC AC Firmware Update Process

Firmware Update Preparation and Steps

Detailed instructions for preparing and executing the DRC AC firmware update.

Executing the DRC AC Firmware Update

How to initiate the update process using the DRC AC update tool.

Post-Firmware Update Procedures

Verifying DRC AC Firmware Update Completion

How to confirm the firmware update was successful and the device is ready.

Firmware Update Warnings and Factory Reset

Important warnings during the update and information on settings reverting to factory defaults.