Need help?Do you have a question about the Audison SR 1Dk and is the answer not in the manual?
General| Channels | 1 |
|---|---|
| Class | D |
| Damping Factor | > 200 |
| THD + N | < 0.1% |
| Remote Gain Control | Yes |
| Frequency Response | 10Hz - 500Hz |
| Signal-to-Noise Ratio | 100 dBA |
| Input Sensitivity | 0.2V - 6V |
Official designation of the document as an advanced web manual.
Detailed layout and description of the amplifier's control panel and terminals.
Explains the PRE IN and PRE OUT RCA connection types.
Illustrates wiring for SPEAKER IN and PRE OUT connections.
Details the operation of the optional subwoofer remote volume control (VCRA).
Illustrates the setup for the amplifier in Master mode for amp chaining.
Illustrates the setup for the amplifier in Slave mode for amp chaining.
Shows different subwoofer configurations and speaker output connections.
Configuration for bridging two amplifiers for a single subwoofer.
Configuration for bridging four amplifiers for two subwoofers.
Illustrates an example of the Endless Series configuration.
Further example of Endless Series setup with Master and Slave units.
Demonstrates a dual slave configuration for amp chaining.
Details the function and adjustment of the phase control.
Information on equalizer and subsonic filter settings and their graphs.
Electrical requirements and power supply parameters.
Detailed performance data for the amplifier stage.
Summary of input sensitivity, impedance, and filter ranges.
Details on adherence to CEA-2006 standards.
Specifications for the amplifier's size and weight.
To Next Page
