Need help?Do you have a question about the Audison SR 4 and is the answer not in the manual?
Detailed illustration of the amplifier's control panel and terminal layout for functions and connections.
Diagram for connecting a single RCA input to Channel A, including PRE OUT (Bypass) function.
Diagram illustrating dual RCA input connections for Channels A and B.
Diagram for connecting speaker-level input to Channel A, with PRE OUT (Bypass) function.
Diagram showing dual speaker-level input connections for Channels A and B.
Wiring examples for 4-channel operation: Multichannel and Front-Rear configurations.
Wiring example for 3-channel operation: Front-Subwoofer configuration.
Wiring example for 2-channel operation: Front Left and Front Right speakers.
Table detailing filter and mode settings for 4-channel amplifier operation.
Table detailing filter and mode settings for 3-channel amplifier operation.
Table detailing filter and mode settings for 2-channel amplifier operation.
Table outlining specific configurations for combined 4 and 3-channel modes.
Illustration showing how to access the amplifier's top cover and locate the internal fuse.
Detailed specifications for voltage, current draw, and remote voltage requirements.
Technical parameters for the amplifier stage, including distortion, bandwidth, and S/N ratio.
Specifications for input/output impedance, sensitivity, and filter types (HPF/LPF).
Physical dimensions (WxHxD) and weight of the amplifier in both metric and imperial units.
CEA specifications, output power ratings, and confirmation of CEA-2006 compliance.
To Next Page
General
