To Next PageTo Next Page
Need help?Do you have a question about the Audison Millennium Power 4 and is the answer not in the manual?
Presents the owner's manual, company details, and product name for the Audison Millennium 4 amplifier.
Diagram illustrating the location and labels of controls and connectors on the amplifier's front panel.
Details the amplifier's advanced circuitry, including differential stages, Darlington connection, and MOSFET PWM power supply.
Advises on environmental conditions (temperature, dryness, ventilation) and power supply compatibility for proper function.
Provides instructions for mounting the amplifier and recommends using Audison branded cables for installation.
Covers input grounding, output connection safety, and managing saturation phenomena for optimal sound.
Diagram showing amplifier connections for wideband front and rear channels with the crossover engaged.
Diagram illustrating connections for a single input sub stereo configuration with the crossover engaged.
Illustrates terminal block locations for power, ground, remote, and speaker connections.
Table providing recommended power cable sizes (mm² and A.W.G.) based on load impedance.
Guidance on connecting the power supply using Audison Powerflow cables.
Guidance on connecting speakers using Audison speaker cables.
Information on recommended lengths for PIN-RCA/PIN-RCA extension cables.
Visual representation of amplifier connections for the one input/sub stereo mode with crossover active.
Visual representation of amplifier connections for wideband front/rear mode with crossover inactive.
Schematic illustrating the internal signal flow and functional blocks of the amplifier.
Description of the ON and SAFE indicator lights and their meanings.
Explanation of the level adjustment knobs for CH A, CH B, HI-PASS, and LO-PASS sections.
Details on IN SELECT switch for input routing and CH A/B mode selection (Stereo/Mono).
Explanation of X-OVER OFF, ON, and CUT controls for managing frequency division.
Description of main input terminals (IN A, IN B) and auxiliary outputs (OUT BY-PASS, OUT HI).
Explanation of speaker output terminals for CH A/HI-PASS, CH B/LO-PASS, and MONO configurations.
Details on the POWER input and REMOTE connection terminals.
Summary of ON indicator and volume controls (CH A, CH B, HI-PASS, LO-PASS).
Explanation of IN SELECT, CH A/B modes, and X-OVER controls (OFF, ON, CUT).
Details on main inputs (IN A, IN B) and input selection for various operating modes.
Description of speaker output terminals (CH A/HI-PASS, CH B/LO-PASS, MONO).
Summary of power input and remote control connection terminals.
General
