Need help?Do you have a question about the Audison Prima Forza AP F8.9 bit and is the answer not in the manual?
General| Channels | 8 |
|---|---|
| Class | D |
| DSP | Yes |
| S/N Ratio (A weighted @ 1 V) | > 100 dB |
| Remote In | Yes |
| Fuse | 30 A |
| Inputs | High-Level |
| Outputs | Speaker outputs |
| THD + N @ 1 kHz, 4 Ohms | 0.05 % |
| Input Impedance (Low-Level) | 10k Ohms |
| Frequency Response | 10 Hz - 30 kHz |
Detailed description of the AP F8.9 bit amplifier and safety precautions.
Lists all items included in the AP F8.9 bit amplifier package.
Instructions for installing the AP F8.9 bit amplifier and the DRC.
Detailed description of all connection terminals and ports on the AP F8.9 bit.
Guides on connecting power, remote, inputs, and outputs for the AP F8.9 bit.
How to connect the power supply and remote turn-on signal.
Configuration of various input signal types for the AP F8.9 bit.
Details on using the digital optical input for audio signals.
Configuration of the 8 amplified and 1 pre-amplified output channels.
Connecting the AP F8.9 bit to a PC and using the DRC for control.
Step-by-step guide for installing and uninstalling the AP F8.9 bit software and drivers.
Detailed steps for installing the AP F8.9 bit PC software.
Instructions for installing the necessary drivers for AP F8.9 bit.
Procedures for removing the AP F8.9 bit software from the PC.
Comprehensive guide to configuring the AP F8.9 bit using PC software.
Using the software in offline mode for analysis and familiarization.
Guided procedure for system setup, input, and output configuration.
Fine-tuning system acoustics using the equalizer, filters, and time delay.
Displays AP F8.9 bit interface status, firmware version, and serial number.
Options for loading, saving, and managing configuration files.
Managing internal memories for storing and recalling configurations.
Accessing various software settings like limiter, de-equalizer, and working mode.
Functions for synchronizing, finalizing, updating firmware, and resetting the device.
Accessing online help, tutorials, and product manual.
Shows and allows selection of the active audio source.
Visual representation for managing and assigning output channels.
Enables direct selection and setting of parameters for individual speakers.
Configuring crossover filters, types, slopes, and models.
Calculating and setting time delays for precise sound staging.
Adjusting sound equalization using parametric control points.
Adjusting output levels for individual channels and the master volume.
Storing and recalling system configurations in two memories (A, B).
Displays real-time working status and information about the PC software.
Solutions for common operating problems and issues.
Resolving issues with PC connection and data synchronization.
Troubleshooting excessive hissing or background noise.
Procedure for updating the AP F8.9 bit firmware.
Overview of optional accessories for the AP F8.9 bit.
Description of the DRC MP and DRC AB digital remote controls.
Information on the SPM4 stereo passive mixer accessory.
Detailed technical specifications of the AP F8.9 bit amplifier.
To Next Page
