PRE IN
AP F8.9 bit is provided with a 12 pole multipolar connector to manage the PRE IN input signals, by soldering the
RCA female connectors to the terminals, or using the accessory ACP6 to interface head units featuring a PRE
OUT output. Connect up to a maximum of 6 input channels using the multipolar connector supplied or the extra
cable provided with RCA connectors. By default the AP F8.9 bit accepts signals coming from Front Left/ Front
Right, Rear Left/ Rear Right, Center/ Sub and the signal to be applied must have a value ranging between 0.6 and
6 V RMS (Fig.4). Such input channels can be then customized using the PC (see sec. 5.2 - 7.3.5).
4
4
320 mm / 12.6 in.
10 mm
0.39 in.
FRONT VIEW
orange
purple
gray
orange/black
purple/black
gray/black
blue
green
white
blue/black
green/black
white/black
SPEAKER OUT.
AP F8.9 bit is provided with a 16 pole multipolar connector to manage the power output signals.
5
Wire Size: AWG 16
320 mm / 12.6 in.
10 mm
0.39 in.
+
+
+
+
+
+
+
+
-
-
-
-
-
-
-
-
FRONT VIEW
OUT 8 +
OUT 6 +
OUT 4 +
OUT 2 +
OUT 8 -
OUT 6 -
OUT 4 -
OUT 2 -
OUT 7 +
OUT 5 +
OUT 3 +
OUT 1 +
OUT 7 -
OUT 5 -
OUT 3 -
OUT 1 -
A minimum of 4 and a maximum of 8 speakers can be configured based on the system you wish to create in your
vehicle. (see sec. 5.4)