Need help?Do you have a question about the Audison AP8.9 bit and is the answer not in the manual?
Lists all items included in the AP8.9 bit package for installation.
Explains the positive and negative power supply terminals and connections.
Manages input signals, REM IN/REM OUT, and control functions.
Details the 16-pole multipolar connector for power output signals.
Describes how to connect power supply and remote turn-on signals.
Table showing stereo and bridge mode power configurations for each channel.
Step-by-step guide for installing the AP8.9 bit PC software.
Step-by-step guide for installing the AP8.9 bit drivers.
Guides through configuring inputs, outputs, EQ, and time delays.
Allows setting parameters for crossover filters for each output channel.
Guides on calculating and setting time delay for speaker-to-listener distance.
Details the parametric equalizer functions and controls.
Shows output levels and controls for each channel, including mute, link, solo, volume, and sub volume.
Addresses operating problems and connection loss during PC calibration.
Discusses causes and solutions for hissing or background noise.
To Next Page
General
