The following paragraphs describe the functions to adjust the system and its acoustic fine tuning.
This window shows whether AP8.9 bit is properly interfaced with the PC and the DRC. It also shows the Firmware
version for the device and the Serial Number.
If you choose to leave the speakers/amplifiers connected to AP8.9 bit, remember to make adjustments with a
general volume that won’t damage the other speakers in the system.
(see sec. 7.3.13.8)
7.3 ADJUSTING ACOUSTIC REPRODUCTION
WARNING: When exploring the functions, do not change the parameters on AP8.9 bit. Take your time to get familiar
with the possibilities the software offers.
7.3.1 DEVICE INFO
7
14
13
10
11
7
12
1
1
2
9
8
3 4 5 6
To Next Page
Loading...
