1. Load: it loads the entire AP8.9 bit configuration from
a previously saved file (e.g.: “AP8.9bit setup1.aps”).
This function is present in both TARGET mode
and in OFF LlNE mode.
In TARGET mode it can reload all of the previously
saved settings. This function is useful if you wish
to install another AP8.9 bit with the same settings.
The input level calibration and, possibly, the De-Eq
levels must be repeated.
In OFF LINE mode, you can check the previously
saved settings.
2. Save Setup: it saves the entire AP8.9 bit configuration
for AP8.9 bit in one file (e.g.: “AP8.9Config.aps”), that
can be reloaded later in AP8.9 bit using the Load Setup
function. This function is present in both TARGET mode
and in OFF LlNE mode.
3. More setup files (online): This function requires an
internet connection. By clicking on this entry, a link to
download new installation setups appears.
5. Exit: Exits the PC software.
Remark: Other languages may also be available. Verify through "Check for Updates"
4. Preferences: Lets you display the context
messages
in the chosen “Language” (Italian or English).
The PC Software automatically defaults to English.
To change the language, select language from the
menu and restart the PC Software.
By clicking on the File tab, a drop-down menu appears with the
entries shown in the image:
7.3.2 FILE MAIN MENU
By clicking on this item, a drop-down menu appears
with the entries shown in the image:
7.3.3 MEMORIES MAIN MENU
1
2
3
1.
Copy A to B: Copies the contents of memory A to
memory B.
2. Copy B to A: Copies the contents of memory B to
memory A.
3. Reset current memories: Resets the crossover and
standard equalizer values, those that are proposed
at the end of the configuration procedure.
3
2
7
1
2
3
4
5
To Next Page
Loading...
