Audison AP8.9 bit User Manual

AP8.9 bit /
10
USER’S MANUAL
5. CONNECTIONS
5.1 POWER SUPPLY AND REMOTE TURN ON
AP8.9 bit is on when the logo is lit blue. It can be turned on/off using the following methods:
1. By pressing on the main DRC control knob (ON). By holding down the main control knob on the DRC (OFF).
In this case, no other Remote In connections are needed, but they can co-exist.
2. By connecting the REMOTE IN terminal with a Remote Out signal coming from an after market audio source.
3. Through the Hi Level MASTER (FL - FR) input. The AUTO TURN ON (ART) function is activated by connecting
the output of an amplified source to the INPUT FL - FR input channel. This function can be enabled/disabled
using AP8.9 bit PC software
(see sec. 7.3.4.7).
4. Using the Low Level (Pre Out) input. The AUTO TURN ON (AST) function is activated by connected the outputs on a
preamplified source to the input channels to the AP8.9 bit input channels. This function can be enabled/disabled
using AP8.9 bit PC Software. This turn on control is available on the FL FR RL RR IN1 IN2 inputs
(see sec. 7.3.4.7).
5. By connecting the OPTICAL SELECT / AUX IN SELECT terminal with a Remote Out signal coming from an auxiliary
source, or connecting to terminal to 12V. This function can be enabled/disabled using AP8.9 bit PC Software (ee sec. 7.3.4.7).
Turn AP8.9 bit on and off
0
1
2
3
4
5
6
7
POWER - 12V
USB
OPTICAL SEL.
12345
123
456
76
8
UPGRADEPRESETS
SPEAKER
OUT
OPTICAL IN
DRC
SUB OUT
INPUTS
ASP
OFF ON
REM IN
REM OUT
MASTER ENABLE
30A
(Not provided.
Suggested Fuse
30 A delayed)
Max 20 cm / 7.9 in.
15 mm / 0.6 in.
8 AWG Max
SD
REMOTE OUT
REMOTE OUT
pink OPTICAL SELECT
AUX SELECT
blue REM IN blue/white REM OUT
REM IN
EXTERNAL SUBWOOFER
AMPLIFIER (Optional)
OPTICAL SOURCE
HEAD UNIT
brown MASTER ENABLE + 12 V
+ 12 V
*
(see sec. 7.3.4.7)
5
HEXKEY 2,5 mm

Audison AP8.9 bit Specifications

General

Brand	Audison
Model	AP8.9 bit
Category	Amplifier
Language	English