Audison Prima Forza AP F8.9 bit User Manual

14
AP F8.9 bit /
USER’S MANUAL
1. Using the DRC, selecting the OPTICAL input.
2. Using the OPTICAL IN terminal.
This command is active connecting the terminal to + 12V.
How to select the OPTICAL input:
5.3 DIGITAL OPTICAL IN INPUT
WARNING: the digital input accepts up to 192 kHz / 24 bit stereo PCM signals. So DOLBY DIGITAL (AC3) multi-channel signals
coming from audio/video sources (such as the audio of a film in DVD) or DTS can not be reproduced. The output of
these devices will therefore have to be set in STEREO mode for the signal to be reproduced.
7. PRE INPUT FRONT + REAR + CENTER + SUB + REAR
5
(see sec. 7.2.5.1)
OPTICAL FIBER (vedi sez. 9.4; 9.5)
0
1
2
3
4
5
6
7
USB
PRESETS OPTICAL IN
SUB OUTFUSE 2x30A CTRL
SPEAKER IN
PRE IN
DRC
UPGRADE
OFF ON
SPEAKER OUT
POWER - 12V
SRC
MEM
TOSLINK connector
PCM Stereo signal, max 192 kHz / 24 bit
DRC MP (Optional)
DRC AB (Optional)
0
1
2
3
4
5
6
7
USB
PRESETS OPTICAL IN
SUB OUTFUSE 2x30A CTRL
SPEAKER IN
PRE IN
DRC
UPGRADE
OFF ON
SPEAKER OUT
POWER - 12V
SD
FRONT LEFT
FRONT RIGHT
REAR LEFT
REAR RIGHT
IN 1
IN 3
IN 2
IN 4

Audison Prima Forza AP F8.9 bit Specifications

General

Brand	Audison
Model	Prima Forza AP F8.9 bit
Category	Amplifier
Language	English