South of Market Audio Dock Manual 19
You can place your iPod/iPhone in standby mode when it is docked
simply by touching the Play/Pause sensor [2] of the Audio Dock for
two seconds.
To put the Audio Dock into low-power standby mode, touch
and hold the Play/Pause sensor [2] for six seconds. The indicator
will turn red to reflect the Audio Dock’s standby status. To wake it
up, simply touch the Play/Pause sensor again.
Note: While the Audio Dock is in standby mode, it won’t charge
your docked iPod/iPhone. As soon as you wake it up, it will.
Standby Mode—for your
iPhone/iPod and for the
Audio Dock
When the Audio Dock is in standby mode, it
draws less than 0.6 Watts of power. Energy
conservation is important for creating a
sustainable planet—so we encourage you to
put the Audio Dock in standby when you’re
not using it. And if you know you won’t be
using it for a while, just turn it off via the
back panel switch [14].
Did You Know?
To Next Page
Loading...