Audyssey Audio Dock - Technical Specifications

South of Market Audio Dock Manual 20
Technical Specifications
Electroacoustic
Physical I/O
Bluetooth
Power
Physical
Woofers
4” side firing, one each for L and R, long-throw
Tweeters
Silk dome, ¾” angled, one each for L and R
Amplifiers
4-channel PWM Class-D architecture; bi-amped on each side
Crossover
Active, using DSP
Audyssey Technologies
Audyssey EQ for a wide range of program material and installation conditions out of the box
Dynamic EQ to maintain the frequency balance at all levels
BassXT to extend the low-frequency range beyond the capability of other small-box systems
Three user-equalization mechanisms: Tilt control, Fast Slope Tone control and Custom EQ
Dynamic Volume to control the volume range of various sources
Dynamic Voice to provide clear pickup and echo suppression
Maximum SPL @1m
Approximately 100 dB SPL using fantastic rock-n-roll program material
Microphones
Cardioid (directional), one each for front and rear
Cabinet
Two sealed enclosures
Apple iPhone/iPod
30-pin Apple Docking Connector
Audio
3.5 mm (1/8-inch) stereo input; 3.5 mm(1/8-inch) mono output
Dimensions
5” (w) x 9” (d) x 9” (h); 13 cm (w) x 23 cm (d) x 23 cm (h)
Boxed Weight
9 lbs; 4.1 kg
Profiles
A2DP, HFP
Pairing Name
Audyssey Audio Dock
Pairing Code
0000
Input Voltage
100V
AC
-120V
AC
(50/60 Hz) Factory set based on location
220V
AC
-240V
AC
(50 Hz) Factory set based on location
Power Draw
Quiescent: 15.2 W
Max 131.8 W
Standby 0.6 W