COMpact 3000 analog/ISDN/VoIP - Firmware V4.0 - Operating Manual V06 12/2020 261
Functions
LCR
Creating Networks Manually
2. Enter the local area code in the entry field in the last row.
3. Click Create LCR networks automatically with help of the area code.
Further steps:
– Save your settings before you leave the page.
– Enter the tariff information in the LCR tables.
Creating Networks Manually
Up to 60 networks can be generated.
Note: LCR networks and the corresponding LCR prefixes can automati-
cally be created based on the local area code (FUNCTIONS > Least Cost
Routing > LCR networks under Create LCR networks automatically with
help of the area code).
The creation can be carried out as follows:
• Via the configuration manager
Requirements:
– Configuration manager, opened with sufficient authorisation
1. Open the page FUNCTIONS > Least Cost Routing > LCR networks.
2. Enter a name for identification in the first available Name entry field. The following
entries are possible:
3. Click .
The network has been added to the list.
4. Repeat steps 2 to 3 to create additional entries.
Further steps:
– Save your settings before you leave the page.
– Create the corresponding prefixes for the networks to complete the tariff groups.
Up to 16 digits
Digits and characters
To Next Page
Loading...
