auna 388 DAB+ - Playing MP3 Discs; ID3;Display function (on remote control only); Repeat;Random mode (on remote control only)

39
EN
2. During play or pause mode, if “skip down” button (13) is pressed. It will
go to the previous track, original track no. is display and remains the
play or pause mode.
For MP3 Disc
1. After focus search is performing, the total number of track and album
will be shown on the LCD display (2). The unit will start to plat directly.
2. Turn “Folder/Pre up/down ” knob on the remote control to select the
folder number.
3. Pess “Skip Up or Skip Down” button (23/13) to select the track number.
ID3/Display function (on remote control only)
Press the “Info” button repeatedly, the LCD display (2) show “le” during
playback of MP3 le, the song le/album/song/artist name is being
displayed few seconds in sequence. Then will change back to current clock
time.
Remark:-
• In that case of no name or not supportive languages had been assigned
for the track, LCD display will blank (2) when press the Info button.
• No Title/Album name can be recognized if the input format on the Disc
is not supporting by the system.
• The system support only English and Arabic number for ID3 function.
MP3 track format requirement:-
• Bit rate : 32 kbps~320kbps, sampling rate: 32khz, 44.1khz and 48 kHz
decodable
• The performance of playing MP3 Disc is various from the quality of
recording disc and the method of recording. Furthermore, the searching
lead-time for MP3-CD is longer than normal CD due to dierence
format.
Repeat/Random mode (on remote control only)
Press the “Play Mode” button on the remote control during playback to
select repeat and random function, a single track, all the tracks repeat or
folder repeat (MP3 only) and random can be played in dierence mode as
follow:-