42
EN
play via the USB socket. This is not a malfunction of the system.
• USB port does not support connection with USB extension cable and is
not designed for communication with computer directly.
ENCODING OF CD DISC / PHONO OR CASSETTE
TAPE INTO MP3 FILE
The system is able to encode normal CD/Tuner/Phono or cassette tape le
to MP3 format and recording at memory media with USB connecting port
or SD/MMC card and below explanation was encode to USB port and same
procedure if encode to SD/MMC card. The system will create a music folder
name – “ RIP” for CD-DA encode, “REC” for Tuner, Aux, Cassette encode and
“FROMCD” for CD-MP3 disc copy and encode bitrate default at 128kbps
A) CD encoding
I) encoding 1 track / 1 disc at 1x speed
1. Perform normal playback of the CD track you want to encode & record,
2. Press REC button (4) during the playback of the desire track and the
isplay will show “REC” and “USB” ashing.
3. Press REC button (4) again the display will show “REC” and “ONE”
ashing.
4. Press REC button (4) again, the system will ashing with “REC USB” icon.
Encoding is performing now.
5. After completing of recording, unit will stop playback automatically.
6. Press “stop” button (3) to interrupt the recording mode anytime.
7. For encode whole CD track, please stay CD in stop mode then press REC
button (4) three times until the display ashing “REC USB”, then system
will start to playback CD and encoding whole disc.
Remark:
• The recording speed is 1:1 and according to the actual plying time of the
CD track
• The recording format is preset at – MP3 bit rate: 128 kbps, sampling
rate: 44.1khz
• Press STOP button (3) to interrupt the recording mode at any time
B) Copying of MP3 le
If putting a MP3 disc instead of a CD-disc, the system will copy the les to
the USB if press the REC button (4). The operation procedures is same as
CD encoding as stipulate on above, and the system will switch to copying
mode only if MP3 le being read.
To Next Page
Loading...
