15
Safety Instructions
Power supply
•
• Be sure to connect the remote control lead of the car audio to the remote terminal.
•
•
•
•
10-Gauge (AWG-10)or have a sectional area of more than 5 (mm).
General safety notes
•
• Use speakers with suitable impedance.--2 to 16ohm(stereo).
•
• Avoid installing the unit where
it would be subject to high temperatures such as from direct sunlight or hot air from the heater.
it would be exposed to rain or moisture.
considerable rise
in temperature inside the car, allow the unit to cool down before use.
•
•
• lf no power is being supplied to the master unit, check the connections.
•
•
•
•
Protection circuit
when the unit is overheated
To Next Page
Loading...
