auna C-500 - Making connections; Hints before making connections; Fuse replacement

16
 when a DC current is generated
 when the speaker terminals are short circuited.
The PROTECTOR indicator lights up in red and the unit will shut down.


Making connections
Mind the following hints before making connections:
• 
circuits,
• 
be damaged.
• 
terminal of the right speaker with that of the left speaker.
• 
can generate some interference noise.
• 
speaker cords supplied with the car.
• 


other leads have been connected..
Fuse replacement
• If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after

• 
Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could
damage the unit