EasyManua.ls Logo

auna C-500 - Troubleshooting

auna C-500
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
24
Troubleshooting
Problems Cause / Solution
The power indicator does not light up. The fuse is loose or blown -- fasten the fuse or
change it with a new one.
• 
a metal point of the car.
The connection master unit is not turned on, -turn
on the master nuit.
• 

• 

indicator light up in red.
• 
power.
• 
correct.

operating temperature.
Use speakers with suitable impedance--2~8 :
(stereo), 4~8:
Make sure to place the unit in a well ventilated
location.
Alternator noise is heard. The power connecting leads are installed too close


• 

Negative speaker leads are touching the car

 The FILTER switch set to the "LPF" position.
The sound in too low. The level adjustment control is set "MIN"position.

Related product manuals