25
EN
SAFETY INSTRUCTIONS
General instructions
• Lightning - If you are not going to use the unit for a longer period of
time or if there is a thunderstorm, pull the plug out of the socket or
disconnect the unit from the antenna connection. This will prevent
damage to the unit due to lightning and overvoltage.
• Overload - Do not overload sockets, extension cords or integral
sockets as this may result in a re or electric shock.
• Foreign objects and liquid ingress - Never push objects of any kind
into the unit through openings as they may touch dangerous voltage
points or short out parts that could result in a re or electric shock.
Never spill liquids of any kind on the unit.
• Repair and maintenance - Do not attempt to service this unit yourself
as opening or removing covers may expose you to dangerous voltages
or other hazards. Refer all servicing to qualied service personnel..
• Damage requiring service - Unplug the appliance from the mains and
refer servicing to qualied service personnel if any of the following
occurs:
(a) If the power cord or plug is damaged.
(b) If liquid has been spilled or objects have fallen on the unit.
(c) If the unit has been exposed to rain or water.
(d) If the unit has been dropped or damaged.
(e) If the performance of the unit is signicantly reduced.
• Spare parts - If spare parts are required, ensure that the specialist
company replacing the parts only uses spare parts that are approved by
the manufacturer or have the same characteristics as the original part.
Unauthorised replacement may result in re, electric shock or other
hazards.
• Heat - Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including ampliers).
To Next Page
Loading...
Need help?
General
