33
EN
Mode Display
REPEAT TRACK
REPEAT ALL
ALL
RANDOM RAN
OFF MODE ---
FOR mp3 DISC/FILE
Repeat 1 > repeat 1 folder > repeat all tracks > random > o mode.
Mode Display
REPEAT TRACK
REPEAT SINGLE FOLDER
REPEAT ALL
ALL
RANDOM RAN
OFF MODE ---
Repeat play
You can listen the desired tracks or folder repeatedly by this function.
Random play
You can listen all the tracks or folder in a random order by this function.
CD / mp3 disc programming
Up to 40 tacks can be programmed for disc play in any order. Before use, be
sure to press the “ stop
“ button (14)
1. Set in CD mode & stop the playback.
2. Press the “mem/clk-adj” button (17) , “ mem “ will appear on lCD display
(21). Moreover, it will indicate program no. And digits for track no. To be
programmed – “ 01 pr 01 “.
3. Select a desired track by pressing skip up
or down buttons (2).
4. Press the“ mem/clk-adj ” button (17) to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if
necessary.
6. When all the desired tracks have been programmed, press “ band/
”
button (15) to play the disc in assigned order.
7. Press “ stop
” button (14) to terminate program play.
To Next Page
Loading...
