35
EN
• The system will creat a “ audio “ folder and then store the encoding
track in it.
• The recording format is preset at – mp3 bit rate : 128 kbps, sampling
rate : 44.1Khz
• No song title will be recorded during encoding mode
• To interrupt the recroding, press the“ stop
“ button (14) during
recording mode.
• Recording will be completed only entire song being encoded, if
terminate the encoding process intermediately, there is no track being
recorded nor stored to the USB drive.
Copying of mp3 le
If putting a mp3 disc instead of a CD-disc, the system will copy the les
to the USB or Sd/MMC card if press the “
rec “ button (3). The operation
procedures is same as CD encoding as stipulate on above, and the system
will switch to copying mode only if mp3 le being read.
Hints on copying
• The system will creat a “ fcopy “ folder and then store all copy le in it.
• ganze Titel umgewandelt wurde. Wenn der Vorgang zwischenzeitlich
unterbrochen wurde, wird der Titel weder aufgenommen noch auf dem
USB-Speichermedium abgespeichert.
Phono encoding
1. Select “ phon/aux “ mode and then press the “
rec “ button (3) directly.
2. The lCD display (21) with show “
“ & “ rec“ and ashing after few
seconds. Now the system is starting the encoding mode.
3. Start playback at phono for the track which you want to record to USB
position.
4. After nish of recoding, press the “ stop
“ button (14) until the text on
lCD display (21) stop ashing and return to “ phon/aux “ mode.
Radio encoding
1. Select “ tuner “ mode and then select the desire radio station.
2. Press the“
rec “ button (3) to start the encoding.
3. The lCD display (21) with show “
“ & “ rec“ and ashing after few
seconds. Now the system is starting the recording.
4. After nish of recoding, press the “ stop
“ button (14) until the text on
lCD display (21) stop ashing and return to “ tuner “ mode.
Hints on radio encoding
• If the radio reception signal is not strong enough, the system cannot
To Next Page
Loading...
Need help?
General
