39
EN
Remark: if press the sleep button once and the sleep indicator “
“ appear on the lCD display (21), the system will goto standby mode
automatically after selected minutes.
Alarm clock setting (by remote control)
This function allows the system to turn on automatically and wake you up
by CD, tuner, or USB SD mode respectively. First, set the unit at standby
mode and then press & hold the “ timer ” button to enter the setting mode,
the lCD display will show set time – select source:
Wake up source:
Press the “ function “ button to select the source form “ tuner FM “ – “ tuner
MW “ - “ USB ” - “ SD ” – CD repeatly. Press “ timer “ button again after
selected the source.
Wake up time:
Press skip up
/ down “ button to set the hour & minutes
And press “ timer “ button “ to store the memory.
Remark: the unit will switch o automatically after setting the alarm. The
wake up volume is preset at level 20. If there is no music source being
detected (such as USB/SD/CD) when the preset time is reached, system
will default to tuner mode automatically. For tuner wake up, the system
will preset at the latest radio frquency being listened before switching o.
Please switch o the system manually during alarm wake up mode as the
system will not turn o automatically after alarm on mode.
Active/de-active timer function
1. To active the alarm, press once the “ timer ” button on remote handset
until the timer indicator “
” is shown on lCD display (21).
2. . To cancel alarm function by press once again “ timer ” button until the
timer indicator “
” disappear.
Pre-set eq function (by remote control)
This unit provides 4 dierences sound mode to enhance your listening
experience. You can select the desired eect by pressing the “ preset eq”
button repeatedly at following sequence: at > classic > rock > pop > jazz.
Display function (by remote handset)
Press to indicate the current time when the systems is operating by any
mode of all Functions.
To Next Page
Loading...
Need help?
General
