auna iAdapt - Initial Use; Menu Overview

18
Initial Use
• Use the supplied mains adaptor to connect the device to a household mains socket
• Switch the device on with the power switch on the rear. Then press STANDBY on the RC to wake the
device up from standby mode.
• When it is the rst time running the device, the system will ask you to set Language and Network
Congurations. You may setup the network connection immediately, or set it later. Use the navigation
buttons to select the desired option. PressOK to conrm.
• Press STANDBY for standby. Date and time, as well as alarms - if activated - will still be shown on the
display when in standby mode.
• Tips: When you need input the internet password, please press Navigate buttons to choose the chara
cters. In this condition, press LEFT button can turn left and delete the left characters at the same time:
Note: Below characters are available for the radio:
• Numbers (from 0-9)
• English letters (from A to Z and from a to z)
• Other characters (DEL,@,Blank,!,”,#,$,%,&,*,’,+ and (,).
Menu: Overview
Standby
Main menu Internet Radio | Media Center | Information Center | Conguration
Conguration <--> Display <--> Analog / digital
My MediaU
Network <-->
Wireless Network | Manual Cong
Check Net when PwR on
Date&Time <-->
Set Date/Time | Time Format | Date
Format
Alarm <-->
Alarm 1 (I/O) | Alarm 2 (I/O)
Nap-Alarm (I/O) | Alarm Volume.