37
EN
(2) Recording a complete CD
• Insert a CD with the printed side up & close the CD compartment.
• After inserting the CD, press „Record“ (9) - Note: Do not press „Play/
Pause/Stop“ (19) and then „record“, otherwise only the track currently
playing will be recorded.
• & appear and ash on the LCD display (2) during recording.
• After recording, playback stops automatically.
(3) Recording a playback program
• Insert a CD with the printed side facing up & close the CD compartment.
• Select desired track as described in „CD/MP3 Programming“. Then
press „Play/Pause/Stop“ (19) to start playback.
• Now press „Record“ (9) and & appear and ash on the LCD
display (2) during recording.
• After recording, playback stops automatically.
Notes
• You must insert a storage medium (USB or SD/MMC card) to record
les.
• The recording speed is 1:1 and is therefore equal to the playback time of
the tracks
• During the copy mode only MP3 les are copied
• The system creates an „audio“ folder for recording and „fcopy“ for the
copied les
• The recording format is preset - MP3 bitrate: 128 kbps,
sampling rate : 44.1 kh
• During encoding no recording can be done
• To interrupt the recording, press „Record“ again during recording
• If USB and memory card are connected to the device, recording will be
done to USB rst
• Encoding or copying is not completed successfully until the complete
title has been encoded or copied. If the process is cancelled before, no
le will be created on the memory.
To Next Page
Loading...
