41
EN
CD/MP3 OPERATION
CD mechanisms used in devices like this are designed to read all
commercial CDs. It will also read self-compiled MP3,CD-R/CD-RW discs,
but it may take up to 10 seconds for the actual playback to begin. If playback
does not start, it is likely due to the quality of the CD-R/RW disc and/or
the compatibility of the CD compilation software. The manufacturer is not
responsible for the playback quality of CD-R/RW discs.
Do not attach a label or seal to either side of the CD-R/RW disc. It may
cause a malfunction.
Play mode
1. Slide the SOURCE Button select the "CD" position. The LCD DISPLAY will
light.
2. Open the CD DOOR, load a CD with the label side facing upward and
then close the CD door. A few seconds later the total number of tracks
on the CD will appear on the LCD display. Press the PLAY/PAUSE
BUTTON to start playing the CD from the rst track. The PLAY/PAUSE
PLAY () icon will be displayed.
3. While playing, press the BUTTON once to pause,the unit will go to
pause mode and the PLAY () icon and number of track will be ashing.
4. Adjust the VOLUME CONTROL to the desired volume level.
5. Press STOP ■ BUTTON to stop playing.
To pause playback
1. Press the / button to pause the playback.
2. To resume playback, press the / button again.
To stop playback.
Press the STOP button to stop playback.
Skipping to another track
• Press the or buttons to skip backwards to the beginning of the
track or previous track or skip forwards to the next track.
• Press and hold the or buttons to perform fast forward/reverse
playback.
Program setting
User can program up to 32 tracks desired order. Programme mode is
activated while in STOP mode.
1. Press the MEMORY button to enter programme mode.
2. Press the or buttons to select the track that you want to preset.
3. Press the MEMORY button to conrm the track.
To Next Page
Loading...
Need help?
General
