11
EN
CONNECTION
Please pay attention to the correct polarity when connecting the speakers:
(+) to (+) and (-) to (-). Also note the power specications of your amplier
and the speakers. These can be found on the sticker on the back of the
speaker.
CLEANING AND CARE
• Use a soft cloth or cotton dipped in a neutral solution for cleaning the
surface of the speaker. Do not use the type of cloth that you use for
washing dishes or aggressive chemical agents.
• If the speaker is not working properly during a storm, please disconnect
the plug from the power socket and reinsert it after a minute.
• Do not drop small items or a liquid into the speaker.
• In the event that you nd small items or a liquid inside the speaker ,you
see smoke or smell an odour,immediately disconnect the speaker from
the power grid .send the speaker to an authorised service centre.
To Next Page
Loading...
