To Next Page

To Previous Page

or SD/MMC card

IV) copying of mp3 le

If putting a MP3 disc instead of a CD-disc, the system will copy the les to the USB or SD/MMC card

if press the “ Record “ button (3). The operation procedures is same as CD encoding as stipulate on

above, and the system will switch to copying mode only if mp3 le being read.

Remarks: The system will store the le to USB source rst if both USB and SD slot are being occupied

by storage media. If press the “Record“ button during playback of USB or SD source, the le will copy

from USB to SD or SD to USB.

B) Phono encoding

• Plug in the USB pen drive for recording (make sure it had enough empty space).

• Set the function button (6) to “Phono“ position and then press the “ record “ button (3) directly.

• The LCD display (2) with show the word “USB“ and ashing, after then display & and ashing.

Now the system is starting the encoding mode.

• Start playback at phono for the track which you want to record to USB or SD card.

• After nish of recoding, press and hold the “Record “ button (3) until the LCD stop ashing and

return to “phono“ mode.

C) Cassette encoding

• Plug in the USB pen drive for recording (make sure it had enough empty space).

• Set the function button (6) to “Tape “ mode and then press the “ record “ button (3) directly.

• The LCD display (2) with show the word “ USB “ and ashing, after then display & and ashing.

Now the system is starting the encoding mode.

• Start playback of cassette tape(at either deck 1 or 2) which the track you prepare to encoding to

MP3 format.

• After nish of recoding, press and hold the “ Record “ button (3) until the symbol & disappear and

resume to “ Tape“ mode on LCD display (2).

D) le copy (USB -> SD / SD -> USB)

The system allow to copy the les from the USB source to SD/MMC card by pressing RECORD (3):

I) Copying 1 track (assume copy from SD card to USB mode)

• Perform normal playback of the track at SD/MMC card you want to copy,

• Press “Record“ button (3) during the playback of the desire track, unit will display & and as-

hing. Copying is performing now.

• After copying is completed, unit will stop playback automatically.

II) copying all tracks (assume copy from SD card to USB mode)

• Select “ SD “ mode and then insert the SD/MMC card you want to copy.

• After reading of card information is completed, press the “ Record “ button (3) and the unit will

display & and ashing. Copying is performing now.

• After copying is completed, unit will stop automatically.

auna TC-386WE User Manual

Questions and Answers: