4.1 Use of manually adjustable foot
end section (model 455)
The foot end has six adjustable
positions. Carefully pull on the foot end
until the desired position is reached.
To put the foot end into a lower position
you must first pull it up as far as it will
go and then lower it again.
4.2 Use of electrically adjustable
sections (models 455/477/488)
The remote control is used to adjust the
electrically adjustable sections.
1. Raise head support section*
2. Lower head support section*
3. Raise back section
4. Lower back section
5. Raise foot end*
6. Lower foot end*
7. Raise back section and foot end*
8. Lower back section and foot end*
Press one of the 'up' or 'down' buttons,
push the button until the desired
position is reached. Only one button can
be operated at a time.
* If applicable.
4.3 Remote control with cable
Model 455 Model 477
Model 488
GB20
4. Use
_04DU3_3903 - BW.pdf - pag.20 January 23, 2009
LET OP !!! Lage resolutie!
To Next Page
Loading...