3-WAY (Network)
Tweeter - setting the HPF for the tweeters.
HP FRQ - Cutoff frequency: 1 / 1.6 / 2.5 / 4/5 / 6.3 / 8/10 / 12.5 kHz.
SLOPE - Slope: 6 / 12 / 18 / 24 dB per octave.
PHASE - electrical phase switching: 0 ° / 180 °
GAIN (HF LEVEL) - the volume level of the HF speakers, from -8 dB to 0 dB.
Mid range - setting the HPF and LPF of the midrange
HPF FRQ - HPF cutoff frequency (HPF): THROUGH (off) / 30 / 40 / 50 / 60 / 70 /
80 / 90 / 100 / 120 / 150 / 180 / 220 / 250 Hz.
HPF SLOPE - Slope: 6 / 12 / 18 / 24 dB per octave.
LPF FRQ - Cutoff frequency: THROUGH (off) 1 / 1.6 / 2.5 / 3.15 /
4 / 5 / 6.3 / 8 / 10 / 12.5 kHz.
PHASE - electrical phase switching: 0 ° / 180 °
LPF SLOPE - LPF slope: 6 / 12 / 18 / 24 dB / oct.
GAIN (MF LEVEL) - volume level of midrange speakers, from -8 dB to 0 dB.
Woofer - setting low-pass filter (LPF) and subwoofer phase
LPF FRQ - Cutoff frequency: THROUGH (off) / 30 / 40 / 50 / 60 / 70 / 80 / 90 /
100 / 120 / 150 / 180 / 220 / 250 / 300 / 400 / 500 / 600 / 700 / 800 Hz.
SLOPE - Slope: 6 / 12 / 18 / 24 dB per octave.
PHASE (SAB PHASE) - switching the electrical phase: 0 ° / 180 °
GAIN - subwoofer volume level, from -8 dB to 0 dB.
11
DTA setting
Channel-by-channel setting of signal time delays.
The settings for this menu item will be different for 2-WAY / 3-WAY!
2-WAY (Standard)
Position - choice of listening position.
All / Front Left / Front Right / Front All.
Delay - value for each channel.
FL (FRONT LEFT) - front left
FR (FRONT RIGHT) - front right
RL (REAR LEFT) - rear left
RR (REAR RIGHT) - rear right
SUB-L - subwoofer left
SUB-R (SUB. RIGHT) - subwoofer right
AUDIO - sound settings
To Next Page
Loading...
