BLUETOOTH
Pairing with your phone
Pair your phone with the AMH-77DSP receiver:
1. Turn on Bluetooth on your mobile device.
2. Find “AMH-77DSP” in the list of available BT devices and connect to it.
PIN-code for authorization: 1234.
3. In case of successful connection, the “BT” indicator on the display of the
receiver will stop blinking and will light up constantly.
4. The audio signal from the mobile device (music and calls) will be transmitted
to the car speakers.
Outcoming call
Dial the subscriber's number on your phone.
The call will be made through the speakerphone.
Incoming call
When an incoming call arrives, the caller's number will be displayed on the
receiver's screen. Press the button (6) to receive the speakerphone call.
End call
To reject an incoming call or end a conversation, press and hold the button (6) .
15
Switch between phone and speakerphone
During a call, press the button (6) to transfer the audio signal from the
speakerphone to your phone or from the phone to the speakerphone.
Calling the last dialed number
Press and hold the button (6) on the receiver to call the last number in the list
of outgoing calls on your phone.
Press the button (6) on the receiver to activate the Siri function.
Volume control
Rotate the volume knob during a call to adjust the level
volume. Press the button (13) to mute the sound.
To Next Page
Loading...
