Need help?Do you have a question about the Auralic ARIES G2 and is the answer not in the manual?
High-resolution audio streaming using custom Lightning technology over Wi-Fi.
Low-jitter, bi-directional 18Gbps coupling for high-speed data transfer.
Physically separates circuits to protect against electromagnetic interference and reduce jitter.
Two internal linear power supplies to isolate and protect distinct power circuits.
Machined aluminum enclosure designed for EMI shielding and superior dampening.
Internal drive bay for a 2.5” HDD/SSD to store music locally.
Check the box contents and prepare for setup.
Guidelines for positioning the ARIES G2 for optimal ventilation and performance.
Verify the mains voltage setting and grounding for safe operation.
Information on using the AES/EBU, Coaxial, and Toslink digital outputs.
Preferred connection for AURALiC G Series devices, uses HDMI-type connector.
Connect a compatible DAC via USB for audio output.
Connecting USB removable storage for music playback.
Connecting the device to your network via wired Ethernet.
Connecting the device to your network via Wi-Fi.
Connecting the device to the power outlet.
Description of the Power, Play/Pause, M, Up, and Down buttons.
Information displayed on the 4-inch high-resolution true color screen.
IR sensor for assigning device functions to custom remote controls.
Initial screen showing device model, firmware, network, and output channel.
Access to Now Playing, Queue, Library, and System settings.
Configuration for Streamer, Processor, DAC, and Master Clock.
Using front panel buttons to navigate and play tracks in the queue.
Browse and play music from the Lightning Server library using folder view.
Information on Status, Library Paths, Capacity, Tracks, and Last Re-scan.
Setting up Ethernet or Wi-Fi connection, viewing network info.
Choosing signal output channels; analog, digital, and USB outputs.
Configuring idle status and brightness for the front panel display.
Mapping device functions to buttons on a custom remote control.
Accessing setup guides, hardware info, and language settings.
Resetting device settings and configuring streamer options.
Passing original MQA music signal to an external DAC without changes.
Selecting sampling rates for AURALiC's MQA decoding process.
Automatically detects DAC sampling rate support for compatible resampling.
Converting DSD signals to PCM for DACs that do not support DSD.
Choosing between different DSD over PCM markers.
Selecting from four filter modes for optimizing sonic quality.
Accessing Master Clock information and settings via Lightning Link.
Compatibility with OpenHome-based control software like BubbleUPnP and Linn Kazoo.
Step-by-step guide to connect via wired Ethernet using the Home Menu.
To Next Page
General
