programmed for specific hours, and that there is no night temperature.
Example:
The figure above shows that from 6.00 A.M. to 11.00 P.M. Auraton Libra will control the
heating device in such a way that the room temperature will be day temperature (S).
AURATON Libra will switch to night temperature from 11.00 P.M. to 6.00 A.M. (T).
Factory programs
In order for AURATON Libra to know when to turn on the day and night temperatures,
you should be set to an appropriate program for each day of the week. For this
purpose, you can use one of the three factory programs (from 0 to 2):
Program no. 0 – anti-freezing U
Unmodifiable factory program. Designed for all-day anti-freezing temperature setting.
Program no. 1 – weekly
Unmodifiable factory program. Sets day temperature from 5:00 to 8:00 A.M. and from
3:00 to 11:00 P.M.
To Next Page
Loading...
