Option 1:
If, for some reason, you want to stop the current program at a given moment and
extend the day or night temperature, you can do it manually, but for not longer than 24
hours. To do this you should:
Hold the r button for 3 seconds. Then, using the knob, select the number of hours of
manual operation (24 hours at the most) and confirm the setting using the ( button.
AURATON Libra will wait until you choose one of the two temperatures which it should
maintain (day or night). The change is made by using the r button or the knob.
Confirm the selection using the ( button.
Option 2:
If you want to suspend the execution of a given program, e.g. due to a party lasting
longer than expected, but AURATON Libra has already started lowering the
temperature for the night (the T symbol has appeared on the display), you should:
Press the r button, the display will show the symbols of a V and the S. The day
temperature will then be maintained until the next temperature change carried out by
the program.
To withdraw the above-mentioned action press the ( button. The r symbol will
disappear from the display.
Similarly, if the program is using the day temperature but you want it to implement the
night temperature immediately, you should:
Press the r button. The display will show the symbols of a V and the T. The night
To Next Page
Loading...
