EasyManua.ls Logo

Aurender FLOW - Page 2

Aurender FLOW
9 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Buttons and I/Os
Control Buttons
Control buttons are located on the side of the case, as shown below.
Move Down Button
1. To go to the next song when playing music
2. To change the menu item when in Menu mode
Many PC/Mac music player program follows the HID standard so you can use FLOW's control button to
control the music you play.
Play/Pause Button
Play/Pause the song you play.
Move Up Button
1. To go to the previous song when playing music
2. change the menu item when in Menu mode
Menu Button
You can change the settings by pressing the Menu button
Power button
Press & hold the button for about 2 seconds. The FLOW will power up.
It will show the current Host mode for a few seconds.
* FLOW will automatically turn off if it's not used for about 15 seconds.
Menu button Explanation
Basic Menu - single click
Every click of the Menu button will cycle through the next mode of menu.
% : Battery Percentage
First click will show the percentage of battery power remaining.
Host Mode
iOS - Next Click shows the Host mode.
You can set the Host mode you want by pressing the direction button. The Host mode needs to be set
according to the device you want to connect.