Operation
Using the USB Input (PCs and other devices with USB Audio)
The USB A type cable provided with the FLOW should be connected to the USB Audio output of the musical
source.
When connected, the FLOW will automatically turn on.
* When using with Windows PC. A software drive installation is needed prior to use. See Driver Installation
Section for details.
Using the optical input
When only the optical cable is plugged to the FLOW from the music player, FLOW's input mode will be set to
Optical automatically.
When both optical and USB connections are maintained, long press the On/Off Power button to access the
menu to set the audio input to Optical.
Note: The Optical cable provided with the FLOW has one end with a regular square connector and the other
end with a thin 3.5mm connector.
Using a smartphone with Android OS
By using the provided OTG to OTG cable, music played on smartphones can be heard through the FLOW.
To play Hi-Res music, please use the third party App.
Certain smartphone models and OS versions may not support this feature.
iOS Devices (iPhone/iPad)
iOS devices needs USB Camera Kit to connect to the FLOW.
Please use the third party App to play Hi-Res(24bit, 96kHz and above) music.
To Next Page
Loading...