dsd
For DSD files, the cut-off frequency of the noise-shaping filter may be changed as below.
dsd0 : BW=47.7 kHz in DSD
dsd1 : BW=50 kHz in DSD
dsd2 : BW=60 kHz in DSD
dsd3 : BW=70 kHz in DSD
VAR
To select the Headphone Output or Line Out.
VAR : Headphone Output with volume control feature
2V : Fix the output voltage 2V rms
5V : Fix the output voltage 5V rms
The mode will not change if the headphone is plugged in.
You should not connect the Power Amp directly in 2V, or 5V mode.
Connections
① USB 2.0/ USB 3.0
Can be used to play music from PCs, notebooks, iOS devices, Android devices, etc.
② Optical
Can be used to play music from sources with optical outputs.
* You can use the MENU button to change input when both USB and optical connection are connected.
If only one connection is connected, FLOW will use the connection automatically.
To Next Page
Loading...