For connection to MSB Technology DAC clocks, use the "Prol25 to Clock" module from MSB.
* iPad and digital cables are not included
Power Failure Protection
The LiFePO4 battery power supply for the audio circuits also acts as an uninterruptible power
supply. In case of any sudden power failures, the Aurender W20 will power down safely.
Instructions
Please read the following instructions carefully before setting up the Aurender Music
Player.
• Be careful not to drop the device to avoid internal damage.
• Do not disassemble the device.
• Keep magnetic materials away from Aurender to prevent any damage to data.
• Do not expose device to oil, dust, water, high humidity, or smoke.
• Keep ventilation openings free from obstruction.
• When cleaning, use only a soft cloth. Keep out of contact with water or other liquids.
• All servicing must be performed by a qualied representative, or the warranty will be
voided.
• Unplug power cord during severe lightning storms or when unused for a long period of
time.
• Unplug the device from the outlet only after completely turning o the unit.
• Always turn the power o before connecting or disconnecting any cables.
• Please note that hard drives can break down.
It is important to back up your music collection periodically to a separate memory device.
In the event of drive failure, Aurender is not responsible for any loss of data. The drive
manufacturer will only replace faulty drives under warranty and do not compensate for
any loss of data.
Positioning
• Place your device on a at, horizontal, and stable surface.
• Keep away from heat sources, such as radiators.
• Do not stack other products on top of the Aurender.
• Allow space around the device for ventilation.
• Do not place inside an enclosed cabinet.
Front and Rear Panel
To Next Page
Loading...
