Aurender W20 - STEP 3: Update the Aurenders System Software to the latest version

7/27/2018 AURENDER - Reference Music System
https://www.aurender.com/page/manual-w20 8/20
System Installation
To set up the Aurender W20 Reference Music Player and iPad application, please follow the
instructions below:
Connect the Aurender to the following:
A power outlet using the AC power cord that came in the box. Check that the voltage
marked on the rear panel matches the local voltage.
A wireless router with Internet connection, using an Ethernet (LAN) cable
A digital-to-analog converter, or an amplier with digital inputs using an appropriate
digital cable.
If you are using a Word Clock, connect the BNC connector for Word Clock In to the Word
Clock.
If you are connecting the dCS Paganini DAC and Master Clock, dCS Vivaldi DAC,
Constellation pre-amplier, or MSB DAC to the Aurender W20, please refer to the
following diagrams.