Auriol 296289 - Activating; Deactivating the Alarm Function; SNOOZE Function; Switching off the Alarm Signal

60 GB/IE
Activating / deactivating the alarm function
1. Briefly press the MODE button
34
briefly once or twice to reach ALARM 1 or
ALARM 2 mode.
2. Press the + button
35
. The ALARM 1 symbol
3
or ALARM 2 symbol
8
appears
in the LC display. The alarm has been activated.
3. Press the button + again. The ALARM 1 or ALARM 2 symbol in the LC display
goes out. The alarm has been deactivated.
Switching off the alarm signal
Press any button except the SNOOZE- / LIGHT button
33
to stop the alarm
signal. It is not necessary to reactivate the alarm. It switches itself automatically
to the alarm time which has already been set.
Note: The alarm signal sounds for approx. 2 minutes.
SNOOZE function
Press the SNOOZE- / LIGHT button
33
as the alarm signal sounds to get to
SNOOZE mode. The alarm signal sounds again after approx. 5 minutes.