Auriol H4286A - Mounting the Device on a Wall

15 GB/IE
Ensure that the screw
14
is not completely
screwed into the dowel
13
.
 Hang the indoor / outdoor thermometer
from the screw
14
. To do this hook the
hanger
12
of the indoor / outdoor ther-
mometer on to the screw
14
.

Mounting the device
on a wall
 Pull the protective foil from one of the
sides of the self-adhesive pad
15
.
 Stick the self-adhesive pad
15
on to the
back of the device.
 Pull the protective foil from the other side
of the self-adhesive pad
15
.
 Take the device to the desired location
and press it carefully on to a wall or other
smooth surface.
Note: Wait 24 hours after installation until
using the device. This is to allow the self-adhe-
sive pad
15
to achieve an optimum level of
24.02.11 14:55