14
□ Select your home AP from the site survey menu.
□ Enter Home AP password if is encrypted, and click “Join”
□ Click “OK” and exit the app.
□ Wait for 60 seconds camera boot up again and link to WiFi AP router.
If Join home AP connection is successful, LED indicator besides waterproof cover will display a RED light.
If Join home AP connection is failed, LED indicator on the sensor will flash quick in Red & Green light.
Press Reset button to return to AP mode and follow up this step “1.2 Link camera with home AP” to reset Join
home AP again. Make sure your router account and password is correct.
LED indicator
To Next Page