C300H / C300HI / C300H x4 / C300HI x4
C350H / C350HI / C350H x4 / C350HI x4
14
Lowering speed
C300H
Without load: 21 m/min. With load: 32,2 m/min
Without load: 6 ft/min. With load: 10 ft/min
C300HI
C300H x4
Without load: 21,6 m/min. With load: 34,8 m/min
Without load: 7 ft/min. With load: 11 ft/min
C300HI x4
C350H
C350HI
C350H x4
C350HI x4
WARNING
This forklift is not designed to travel with elevated load or with the mast tilted
forward.
Do not tilt forward the mast with the forks elevated except to pick up or deposit
the load.
Control panel
The controls, switches and warning lights are integrated in the steering column and
below the joystick.
Lighting ()
Work lighting equipment, steering indicators, parking lights and warning.
Overhead guard
Manufactured according with ISO 6055.
WARNING
The operator is protected by an overhead guard which complies with the ISO
3449 and ISO 3471 / ASME B56.6 standards. It provides protection against
falling objects and together with the mast, provides protection should the
forklift overturn. The seat belt is an important part of the safety system and
should always be fastened before starting to operate the forklift. In the event of
the forklift overturning, if the seat belt is not fastened the operator may suffer
serious injury or even loss of life as a result of crushing from the forklift or even
the overhead guard itself.
Aisle widths
See graph.
Technical
Specifications
To Next Page
Loading...
