C300H / C300HI / C300H x4 / C300HI x4
C350H / C350HI / C350H x4 / C350HI x4
72
Refuelling
WARNING
Smoking, naked flames or sparks are not permitted in the refuelling area. Fuel
vapours can be explosive.
- Refuel in a well-ventilated area.
- Position the forklift as close as possible to the fuel pump so that the filler hose
reaches the opening of the tank comfortably.
- Apply the parking brake, switch off the engine and lights, including the rotating
beacon.
NOTE
If the fuel pump is equipped with a vehicle earth connection, connect this to a
non-isolated metal component of the forklift.
- Clean the fuel cap and surrounding area with a cloth if they have been dirtied. Do
not allow dust, water, or any other substance to enter the tank.
- Open the fuel cap using the key and turning to the left.
- Fill the tank without exceeding the volume specified for the forklift. Take care not
to spill fuel outside the tank. If you do, clean immediately and dry the surface well.
- Close the tank using the key and remove it from the cap. Check that the cap is
correctly closed.
Instrument Panel
and controls
To Next Page
Loading...
