C300H / C300HI / C300H x4 / C300HI x4
C350H / C350HI / C350H x4 / C350HI x4
74
Adjusting the seat and the steering wheel (figs. 2, 3, 4, 5)
Before using the forklift adjust the seat and the steering wheel to a comfortable driving
position.
On all machines the operator is able to adjust the seat in the fore-aft direction by lifting
knob (a) and sliding seat to the desired position, then releasing the knob to lock the
seat into position.
The seat suspension may be adjusted from 132 to 264 lb. (60 to120 Kg) for driver’s
weight by turning knob (b). Turning clockwise the weight decreases and turning counter-
clockwise it increases. Seats normally leave the factory adjusted for a driver weighting
198 lb. (90 Kg).
It is also possible to adjust the seat backrest angle. The seat backrest tilts forward or
backwards by turning knob (c).
WARNING
Securely fasten the seat belt.
The position of the steering wheel is adjusted by tilting forward/backwards the steering
column. Loose the lever (d) and release the steering column. Adjust it to the most
comfortable position. Tight lever (d) to lock it again.
Operating
the forklift
(fig. 2)(fig. 3) (fig. 1)
b
c
a
(fig. 4)
d
To Next Page
Loading...
